There won’t be a big WAN Show segment about this or anything. Most of what I have to say, I’ve already said, and I’ve done so privately.
To Steve, I expressed my disappointment that he didn’t go through proper journalistic practices in creating this piece. He has my email and number (along with numerous other members of our team) and could have asked me for context that may have proven to be valuable (like the fact that we didn’t ‘sell’ the monoblock, but rather auctioned it for charity due to a miscommunication… AND the fact that while we haven’t sent payment yet, we have already agreed to compensate Billet Labs for the cost of their prototype). There are other issues, but I’ve told him that I won’t be drawn into a public sniping match over this and that I’ll be continuing to move forward in good faith as part of ‘Team Media’. When/if he’s ready to do so again I’ll be ready.
To my team (and my CEO’s team, but realistically I was at the helm for all of these errors, so I need to own it), I stressed the importance of diligence in our work because there are so many eyes on us. We are going through some growing pains - we’ve been very public about them in the interest of transparency - and it’s clear we have some work to do on internal processes and communication. We have already been doing a lot of work internally to clean up our processes, but these things take time. Rome wasn’t built in a day, but that’s no excuse for sloppiness.
Now, for my community, all I can say is the same things I always say. We know that we’re not perfect. We wear our imperfection on our sleeves in the interest of ensuring that we stay accountable to you. But it’s sad and unfortunate when this transparency gets warped into a bad thing. The Labs team is hard at work hard creating processes and tools to generate data that will benefit all consumers - a work in progress that is very much not done and that we’ve communicated needs to be treated as such. Do we have notes under some videos? Yes. Is it because we are striving for transparency/improvement? Yeah… What we’re doing hasn’t been in many years, if ever… and we would make a much larger correction if the circumstances merited it. Listing the wrong amount of cache on a table for a CPU review is sloppy, but given that our conclusions are drawn based on our testing, not the spec sheet, it doesn’t materially change the recommendation. That doesn’t mean these things don’t matter. We’ve set KPIs for our writing/labs team around accuracy, and we are continually installing new checks and balances to ensure that things continue to get better. If you haven’t seen the improvement, frankly I wonder if you’re really looking for it… The thoroughness that we managed on our last handful of GPU videos is getting really incredible given the limited time we have for these embargoes. I’m REALLY excited about what the future will hold.
With all of that said, I still disagree that the Billet Labs video (not the situation with the return, which I’ve already addressed above) is an ‘accuracy’ issue. It’s more like I just read the room wrong. We COULD have re-tested it with perfect accuracy, but to do so PROPERLY - accounting for which cases it could be installed in (none) and which radiators it would be plumbed with (again… mystery) would have been impossible… and also didn’t affect the conclusion of the video… OR SO I THOUGHT…
I wanted to evaluate it as a product, and as a product, IF it could manage to compete with the temperatures of the highest end blocks on the planet, it still wouldn’t make sense to buy… so from my point of view, re-testing it and finding out that yes, it did in fact run cooler made no difference to the conclusion, so it didn’t really make a difference.
Adam and I were talking about this today. He advocated for re-testing it regardless of how non-viable it was as a product at the time and I think he expressed really well today why it mattered. It was like making a video about a supercar. It doesn’t mater if no one watching will buy it. They just wanna see it rip. I missed that, but it wasn’t because I didn’t care about the consumer… it was because I was so focused on how this product impacted a potential buyer. Either way, clearly my bad, but my intention was never to harm Billet Labs. I specifically called out their incredible machining skills because I wanted to see them create something with a viable market for it and was hoping others would appreciate the fineness of the craftsmanship even if the product was impractical. I still hope they move forward building something else because they obviously have talent and I’ve watched countless niche water cooling vendors come and go. It’s an astonishingly unforgiving market.
Either way, I’m sorry I got the community’s priorities mixed-up on this one, and that we didn’t show the Billet in the best light. Our intention wasn’t to hurt anyone. We wanted no one to buy it (because it’s an egregious waste of money no matter what temps it runs at) and we wanted Billet to make something marketable (so they can, y’know, eat).
With all of this in mind, it saddens me how quickly the pitchforks were raised over this. It also comes across a touch hypocritical when some basic due diligence could have helped clarify much of it. I have a LONG history of meeting issues head on and I’ve never been afraid to answer questions, which lands me in hot water regularly, but helps keep me in tune with my peers and with the community. The only reason I can think of not to ask me is because my honest response might be inconvenient.
We can test that… with this post. Will the “It was a mistake (a bad one, but a mistake) and they’re taking care of it” reality manage to have the same reach? Let’s see if anyone actually wants to know what happened. I hope so, but it’s been disheartening seeing how many people were willing to jump on us here. Believe it or not, I’m a real person and so is the rest of my team. We are trying our best, and if what we were doing was easy, everyone would do it. Today sucks.
Thanks for reading this.[1]
Check LinusTech’s profile for further discussion and comments he’s had.[2]
“my intention was never to harm Billet Labs”
Kid, you said “nobody should buy it”
I think the end conclusion wasn’t great. He said
It absolutely would matter. Just like how a 4090 costs an absurdly high amount but people will still buy it. For the right person getting 20 degrees knocked off might be worthwhile regardless of how expensive it is.
I mean it is a $800/900+ waterblock. No reasonable consumer should buy it. Its a cool project to show Billet Lab’s ability to fabricate and mill custom parts but this is such a niche thing.
The average consumer wouldn’t buy a block to begin with. I know quite a few guys that have spent thousands on their hardline setups, adding another $1000 CAD is a drop in the bucket to them. There is a market for it, just not a large one
I do wish they would have tested it properly, because it was like watching a Top Gear episode where they drive a lambo around a gridlocked city and then say, “not worth the money, sucks”. You’re right, there is a market for it, just not a large one. But also as the other guy said, no reasonable consumer should buy it. All of this is irrelevant to the larger discussion at hand, of course.
And they wouldn’t watch Linus video on it going on the wrong gpu. Those insane people can do what they want but its clear Linus is typically catering to tech “normies” they will do the occasional commercial tech but those are typically using them in ways they weren’t meant to in a rather silly/pointless deployment. I’m not here to say what Linus did to the prototype was great since really auctioning it off is pretty abhorrent but I think people are over exaggerating about him going to be the “death of a startup” when local youtuber “funny” man makes a stupid video on it installing it on the wrong gpu, which has been clearly pointed out to death in the comments even before this controversy popped up.
From Billet lab’s own website, it seems custom parts may be their bag and even though the video was negative on the monoblock (as we already established the reasons why) LTT seemed rather positive about the company, just not the product.
Think this is a case of damned if you do and damned if you don’t. Where I can see where Linus is coming from since he is quite frequently told he is out of touch as shown with his recent “house” videos. I think this could have easily swung the other way of “Wow Linus, of course the techtuber who gets free shit would advertise a 900$ waterblock, we can barely afford the gpus to put these on but he wants us to buy something that cost half the price of the already overpriced gpu its being put on”. Like custom water cooling loop are fucking cool but you get to a huge point of diminishing return. Like if we believe Billet Lab’s own results, the difference between Monoblock and EK quantum magnitude & EK-Quantum Vector is only about 3-5 degrees. People can burn their money how they want but I am pretty certain LTT has made a video saying they actually don’t encourage consumers to watercool their PCs since while its better its typically just a worse user experience (This is me paraphrasing).
They absolutely would, it’s literally the only video on it in huge part because Linus managed to give away the only prototype without permission, accidentally ensuring exclusivity.
And sure, they’d know he fucked up but it might still sway their opinion, maybe even unconsciously.
Oh and when you ask what Linus is going to do to prevent crap like this in the future (after already tripling down on their stupidity with the testing) is “nothing, it’s a one in ten years occurrence”.
The guy absolutely can’t stop jamming his foot in his mouth.
Myself and the guys I was referring to with crazy hardline loops are on first name basis with Linus, we all played left 4 dead together way back when before he even had a YouTube channel (ClosetGamer, anyone?) so his influence with these type of enthusiasts is still pretty strong, at least here in Canada. However he definitely lost a lot of respect with this response of his but honestly I didn’t expect anything different from him
It’s his job to say who should buy it. That doesn’t mean he wants to take food off the tables of manufacturers. A review is useless if the reviewer cares more about not hurting the manufacturer than being straight about the product. That said, the review should obviously be done with a responsible level of thoroughness and competence, but that’s a separate issue.
Well a review is also useless (or at least extremely disrespectful) if it comes from a place where it unfairly tests the product and shoes it in a bad light from the beginning by fucking up the process.
Like sure, the conclusion would likely be the exact same. But you still need to actually test that, and give the product the benefit of the doubt that it actually might be better than it seems and showing it that way.
There’s still a difference between “this is a shit product and nobody should buy it” and “this works as advertised, is cool but nobody should buy it”, since in the latter case someone will definitely still buy it for some reason even if it’s impractical.
No.
It’s his job to provide accurate data, and possibly a recommendation for those wanting to know his opinion.
It’s the consumer’s job to look at the data in the review and determine whether or not to buy it.
You don’t see GN failing to properly review a 4070 Ti because “nobody should buy this”. They do the review properly and then say “nobody should buy this” after having given accurate data.
You don’t get to skip doing your literal job just because you don’t think the product is worth buying.
“It’s his job to say who should buy it.”
Is it though? I suggest his position is more that of presenting what’s there, rather than make the choice for those interested in buying something like that…
“Nobody should buy it” is probably true, but it’s not the problem here. LTT did not do their due diligence before publishing that conclusion. Even a product that no rational consumer should buy deserves a fair review that explores why you might buy it anyway.
A decent reviewer would present the data/facts and would let people make their own conclusions. It’s not wise to outright say do/don’t buy this. People aren’t very smart and are extremely easily lead to make decisions based on their feelings towards the speaker instead of something sound like logic/morals/ethics.