Update: I was wrong about a couple things:
- I’m having issues with 2 different NTFS drives. The ext4 one is fine.
- The issue appears to be driver related. If the drive auto-mounts by udisks2.service, it shows up as “type ntfs3” with the output of mount, but if I mount it manually it shows up as “type fuseblk”. It seems that the fuse-based driver works but the ntfs3 one is broken.
I’m at my wits end with this one.
SSDs on my computer:
- a drive with a Windows 11 install
- a drive with an Ubuntu 22.04 install (the OS I use the most)
- a drive with an Ubuntu 20.04 install (for a piece of touchy software I needed that didn’t seem to like 22.04)
- an NTFS drive to share files across OSes
- an EXT4 drive to share files across OSes
These are all physically separate drives, not partitions of the same drive or something like that. They all SATA SSDs except the Windows one which is nvme.
Ubuntu 22.04 is acting up. It seems that it can write to the NTFS and EXT4 drives fine, but has difficulty reading from them. If I write a file e.g. echo “hello world” > test, the file appears but trying to read it, the file seems empty. I reboot and I can read the file.
When I first encountered this, I thought the NTFS drive was failing, so I did a large rsync (to back up the data) and got some read errors, and then ran a SMART test which came back clean.
Since then, with further testing, only 22.04 seems to have these issues. Both Windows and 20.04 can read and write fine. However, Windows caught some filesystem errors with the drive after the large rsync.
I’m about to reinstall Ubuntu but I’m worried about making things worse somehow. It would be nice to have an idea of what’s going on.
Any advice?
It might help for the folks here to know which brand and model of SSDs you have, what sort of sata controllers the sata ones are plugged into and what sort of cpu and motherboard the nvme one is connected to.
What I can say is Ubuntu 22.04 doesn’t have some mystery problem with SSDs. I work in a place where we have in the order of 100 Ubuntu 22.04 installs running with SSDs, all either older intel ones or newer samsung ones. They go great.
The NTFS one is a Samsung EVO 860 1TB. The ext4 is a cheapo generic brand 256GB.
I’ve got an AMD 5950X CPU. The motherboard is Aorus X570 Elite. Not sure about the SATA controller except it’s whatever comes with that motherboard.
In my searching I found something about Ubuntu changing ntfs and ext4 drivers, but I’m not sure if that’s a change between 20.04 and 22.04 or an earlier one. Also the fact that it’s both drives makes me think it’s probably something else going on.
What I do know is something weird is going on, and my googling so far hasn’t gotten me any good results (just things about not being able to mount drives in the first place, or mounting drives as read only, neither of which are this situation).
If you haven’t already, try running hdparm on your drive to get an idea of if the drives are at least doing large raw reads straight off the disk at an appropriate performance level.
This is output from the little NUC I’m using right now:
# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 512M 0 part /boot/efi ├─sda2 8:2 0 464.3G 0 part / └─sda3 8:3 0 976M 0 part [SWAP] # hdparm -i /dev/sda /dev/sda: Model=Samsung SSD 860 EVO 500GB, FwRev=RVT02B6Q, SerialNo=S3YANB0KB24583B ... # hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 1526 MB in 3.00 seconds = 508.21 MB/secIf your results are really poor for this test then it points more at the drive / cable / controller / linux controller driver.
If the results are okay, then the issue is probably something more like a logical partitioning / filesystem driver issue.
I’m not sure what a good benchmark application for Linux that tests the filesystem layer as well is other than bonnie++ which has been around forever. Someone else might have a more current idea of something to use for this.
You could also try to switch the kernel version. Ubuntu 22.04 currently supports two different versions: 5.15 and 6.5, you could switch to the other one and see if the problem also occurs there.
I just read the update to the post saying that the issue has been narrowed down to the NTFS driver. I haven’t used NTFS on linux since the NTFS fuse driver was brand new and still wonky as hell something like 15 years ago, so I don’t know much about it.
However, it sounds like the in kernel driver was still pretty fresh in 5.15, so doing as you have suggested and trying out a 6.5 kernel instead is a pretty good call.
Yeah, NTFS being the problem actually makes a more sense.
OP could also just use the fuse driver then. I’m using it on 5.15 (Linux Mint) and it works quite well. I only had problems when I tried to use it for a Steam library.
Try only using fuse
If you have OS backup ready you could upgrade from 22.04 to 24.04 pre release with the release data April 25 and see if that helps ? Or just boot from 24.04 live media and test writing ?
Upgrade to 24.04 soon and see if that fixes your issue, probably some race condition somewhere, or maybe a bug that wrote garbage to the fs, and so reading it back fails with the specific kernel in 22.04.
What types of SSDs?
Stop using Ubuntu?
E: not sure why I’m being downvoted for suggesting that OP use literally any other distro that’s not trying to be more like Windows.
There are dozens of other distros that are Ubuntu-based but without the corporate shitfuckery.
use literally any other distro that’s not trying to be more like Windows.
Surely being less like windows will resolve OPs problem with reading ntfs volumes
Surely it might be related to Ubuntu and uninstalling seems like a reasonable first step.
Do you understand the irony of saying that OP can’t read windows volumes because their distro is too much like windows?
Also lol at suggesting they nuke the whole OS over a minor issue they already found a workaround for
…no one said that?
