• lightrush@lemmy.caOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    2 months ago

    Hard to say. She’s been in 24/7 service since 2017. Never had stability issues and I’ve tested it with Prime95 plenty of times upon upgrades. Last week I ran a Llama model and the computer froze hard. Even holding the power button wouldn’t turn it off. Did the PSU power flip, came back up. Prime95 stable. Llama -> rip. Perhaps it’s been cooked for a while and only trips by this workload. She’s an old board, a Gigabyte with B350 running a 5950X (for a couple of years), so it’s not super surprising that the power section has been a bit overused. 😅 Replacing with an X570 as we speak.

    • lightrush@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      2 months ago

      I think I found the source of the liquid @abcdqfr@lemmy.world. The thermal pad under the VRM heatsink has begun to liquefy into oily substance. This substance appears to have gone to the underside of the board through the vias around the VRM and discolored itself.

      Some rubbing with isopropyl alcohol and it’s almost gone:

      Perhaps there’s still life left in this board if used with an older chip.

      • abcdqfr@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 months ago

        Good detective work! Adding liquefying thermal pads as a reason to avoid Gigabyte.