InfoSec Person | Alt-Account#2

  • 6 Posts
  • 33 Comments
Joined 1 year ago
Cake day: September 28th, 2023
  • A Basil Plant@lemmy.worldtoFediverse@lemmy.ml•Mastodon rolls out built-in bylines for journalists in the fediverse
    1·
    5 months ago

    I think the difference lies in two things:

    • You can share an article from a user of a different instance. In this case, your instance will have to look up the rel=“author” tag and check whether the URL is a fediverse instance. I’m not sure whether this is scalable as compared to a tag that directly indicates that the author is on the fediverse. Imagining a scenario where there are 100, 1000, 10,000, or 100,000 instances on different versions.

    • The tag is to promote that the author is on the fediverse. If the rel=“author” tag points to twitter for example, maybe Eugen Rochko + team didn’t want a post on the fediverse to link to twitter.

    These are my thoughts and idk if they’re valid. But I think just reusing the rel=“author” isn’t the most elegant solution.

    I know that mastodon already uses rel=“me” for link verification (I use it on mu website + my mastodon account), but that’s a different purpose - that’s more for verification. There’s still no way of guaranteeing that the rel=“author” tag points to a fediverse account. You’re putting the onus on the mastodon instance.

  • A Basil Plant@lemmy.worldtoLinux@lemmy.ml•Arch Linux, made immutable, declarative and atomic: blendOS v4 released
    471·
    6 months ago

    No. Fuck this shit. Don’t do this.

    It’s already bad when everyone in this community shoves their distro down potential linux-converts’ throats, thereby confusing them even more. Don’t tell (or imply to) freshly converted users that they potentially made a wrong choice.

    TF do you think they’re going to do now? Move to fedora? The commenter above already stated that it was a hassle to install Ubuntu and now you’re telling them to change distros already???

    Ubuntu is still great… compared to Windows. Sure. It may not hold to your ideals. Compared to other distros, canonical may make some questionable choices. BUT THEY DON’T IMPLEMENT A FUCKING RECALL. So it’s fine (for now).

    Ubuntu is fine for newcomers. It has a shit ton of support online and you can easily search questions whose answers are likely to be found within the first few results.

    So stop shoving distros down people’s throats, especially fresh users.

    I know you said:

    Sorry if I sound too hard… take it with a laugh 😁

    It doesn’t come across that way. You come off as a gatekeeper.

  • A Basil Plant@lemmy.worldtoLinux@lemmy.ml•"Hardware Error" after power failure
    82·
    6 months ago

    You haven’t given us much information about the CPU. That is very important when dealing with Machine Check Errors (MCEs).

    I’ve done a bit of work with MCEs and AMD CPUs, so I’ll help with understanding what may be going wrong and what you probably can do.

    I’ve done a bit of searching from the microcode & the Dell Wyse thin client that you mentioned. From what I can garner, are you using a Dell Wyse 5060 Thin Client with an AMD steppe Eagle GX-424 [1]? This is my assumption for the rest of this comment.

    Machine Check Errors (MCEs) are hard to decipher find out without the right documentation. As far as I can tell from AMD’s Data Sheet for the G-Series [2], this CPU belongs to family 16H.

    You have two MCEs in your image:

    • CPU Core 0, Bank 4: f600000000070f0f
    • CPU Core 1, Bank 1: b400000001020103

    Now, you can attempt to decipher these with a tool I used some time ago, MCE-Ryzen-Decoder [4]; you may note that the name says Ryzen - this tool only decodes MCEs of Ryzen architectures. However, MCE designs may not change much between families, but I wouldn’t bank (pun not intended) on it because it seems that the G-Series are an embedded SOC compared to the Ryzen CPUs which are not. I gave it a shot and the tool spit out that you may have an issue in:

    $ python3 run.py 04 f600000000070f0f
Bank: Read-As-Zero (RAZ)
Error:  ( 0x7)

$ python3 run.py 01 b400000001020103
Bank: Instruction Fetch Unit (IF)
Error: IC Full Tag Parity Error (TagParity 0x2)

    Wouldn’t bank (pun intended this time) on it though.

    What you can do is to go through the AMD Family 16H’s BIOS and Kernel Developer Guide [3] (Section 2.16.1.5 Error Code). From Section 2.16.1.1 Machine Check Registers, it looks like Bank 01 corresponds to the IC (Instruction Cache) and Bank 04 corresponds to the NB (Northbridge). This means that the CPU found issues in the NB in core 0 and the IC in core 1. You can go even further and check what those exact codes decipher to, but I wouldn’t put in that much effort - there’s not much you can do with that info (maybe the NB, but… too much effort). There are some MSRs that you can read out that correspond to errors of these banks (from Table 86: Registers Commonly Used for Diagnosis), but like I said, there’s not much you can do with this info anyway.

    Okay, now that the boring part is over (it was fun for me), what can you do? It looks like the CPU is a quad core CPU. I take it to mean that it’s 4 cores * 2 SMT threads. If you have access to the linux command line parameters [5], say via GRUB for example, I would try to isolate the two faulty cores we see here: core 0 and core 1. Add isolcpus=0,1 to see the kernel boots. There’s a good chance that we see only two CPU cores failing, but others may also be faulty but the errors weren’t spit out. It’s worth a shot, but it may not work.

    Alternatively, you can tell the kernel to disable MCE checks entirely and continue executing; this can be done with the mce=off command line parameter [6] . Beware that this means that you’re now willingly running code on a CPU with two cores that have been shown to be faulty (so far). isolcpus will make sure that the kernel doesn’t execute any “user” code on those cores unless asked to (via taskset for example)

    Apart from this, like others have pointed out, the red dots on the screen aren’t a great sign. Maybe you can individually replace defective parts, or maybe you have to buy a new machine entirely. What I told you with this comment is to check whether your CPU still works with 2 SMT threads faulty.

    Good luck and I hope you fix your server 🤞.

    Edited to add: I have seen MCEs appear due to extremely low/high/fluctuating voltages. As others pointed out, your PSU or other components related to power could be busted.

    [1] https://www.dell.com/support/manuals/en-us/wyse-5060-thin-client/5060_wie10_ug/system-specifications?guid=guid-cbeecec5-25ac-4103-8b4b-7d3a975e91f0&lang=en-us

    [2] https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/datasheets/52259_KB_G-Series_Product_Data_Sheet.pdf

    [3] https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/programmer-references/52740_16h_Models_30h-3Fh_BKDG.pdf

    [4] https://github.com/DimitriFourny/MCE-Ryzen-Decoder

    [5] https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html

    [6] https://elixir.bootlin.com/linux/v6.9.2/source/Documentation/arch/x86/x86_64/boot-options.rst

  • A Basil Plant@lemmy.worldtoProgrammer Humor@lemmy.ml•Of course
    3·
    6 months ago

    Excellent question!

    Before replacing the instruction with INT 3, the debugger keeps a note of what instruction was at that point in the code. When the CPU encounters INT 3, it hands control to the debugger.

    When the debugging operations are done, the debugger replaces the INT 3 with the original instruction and makes the instruction pointer go back one step, thereby ensuring that the original instruction is executed.