Create by OVERWERK is a good example that uses what I’m talking about multiple times throughout.

I love when the track goes completely silent for a single rest after some buildup and then punches back into the full chorus. If that “gap” in noise is part of the melody itself it’s even cooler. It makes the following sound so much more impactful, even if the actual volume hasn’t increased by much.

I recall hearing a long time ago that most news sites, magazines, newspapers, etc. tend to target a sixth grade reading level. So, I don’t know if there’s been a sharp rise, but it’s not really surprising considering how far beyond most readers should be.

My assumption is that he means the recommendation algorithms for social media and content feeds like Twitter, Facebook, YouTube, etc.

So, for flex-direction: column, usually you’ll want to use it when you need multiple items to be consistently spaced vertically. For example, you have a testimonials section on your webpage with some divs that contain quotes, and you want them to be centered in the page, stack on top of each other, and have equal spacing between each quote. This is where flex-direction: column comes in. You just set the flex five to the height you want, slap display: flex and the flex direction properties on it, set justify-content to between, and maybe align-items to center so that all the child divs are in the center of the parent, and voila!

In real life, you’ll mainly see this used on mobile, where lots of elements need to be stacked on top of each other, but there are cases on other viewports where it makes sense. For example, in lining up fields in a vertical form like a login or sign up page where the username, password, and login/create account buttons are all stacked on top of each other.

Rick Darge is fantastic if you’re into high-quality, short form sketch comedy. Krazam has grown recently but is still relatively small and makes more tech-related sketches.

You could get hit by a truck the day after having your child leaving them without a parent. Don’t let fear hold you back. No one lives without experiencing any suffering at all, it’s just part of life. If you love your children and care for them, then they’re already setup to have a much better life than most will.

Oh man, we can’t make Han look like the bad guy! Just a quick select -> translateX -20% should do the trick.

Hot take: I don’t “get” Spirited Away. Like I appreciate the art and animation, but the story and characters are a confusing mess to me. I’ve heard the explanation of “it’s a critique of Japanese society”, and looking back on it I can see the symbolism, but if you need additional context for the story to make sense, then I don’t think it’s a very good movie, at least I don’t think it deserves universal acclaim if it only makes sense to one specific culture.

But… you took the bribe.

Makes sense. I bought one secondhand and still got the digital goodies.

Well, self awareness goes a long way, so you’re on the right path. Lots of people get crotchety and cynical by focusing too much on things that are outside their control. Focus more on areas of your life that you can influence, and learn to enjoy your life for what it is rather than what it could be.

Honestly, if you’re the type of person who’s prone to this, disengaging from hyper cynical social media platforms (yes, including Lemmy) is probably another good idea.

My dad used to be super into politics and consumed rage-bait news on TV and social media a lot, especially during the height of covid. Once he unplugged from all of that there was a noticeable shift in his demeanor and I would say that he’s significantly happier and more content now.

JSON by a mile. I hate the YAML plague, it’s some of the most unintuitive syntax I’ve seen and yet it’s everywhere in DevOps/SysOps.

Downvotes are critical, in my opinion, especially for recommendation posts. It’s a good way to combat astroturfing and let genuine discussion rise to the top.

That might be more water than most water.

Yes! I think this means that the AI assistant plug-in will work now?

My wife and I have gone on and off Keto/Low-carb diets when we start gaining weight and it works really well for both of us I ended up losing ~30lbs in the first four months. I haven’t really had to watch calories at all as the diet itself will usually naturally lower your calorie intake for the same volume of food. I don’t work out at all as I don’t have the time in my schedule between kids, work, and social obligations. I’m a programmer as well so all of my work is done sitting at a desk

English is the language that most western countries speak, and most education systems in other countries teach English as a second language.

I went back and forth and have both, but ultimately I’ve ended up enjoying FDM a lot more. It really depends on both what you want to accomplish, and how much you’re willing to spend.

I started off with a cheap Ender 3 V2, used it for a little while, then stopped using it as it was a nightmare having to level it and calibrate it constantly. After that I got an Elegoo Mars 2 Pro as I wanted to be able to make prints without all the mechanical complexity of a FDM printer. It was nice for a while, but I ended up not using it as much because I realized that I enjoyed making functional parts a lot more than art/display pieces like miniatures.

I ended up biting the bullet and getting the best printer I knew of at the time: the Prusa i3 MK3S+. I got the kit version so that I could save some money. While I wouldn’t get another kit, I do think that everyone should get a printer that they need to build from scratch at least once. I learned about every single piece of the machine in detail as I went along, and I now clearly understand what people mean when they use terms like “gantry”, “idler”, “heat break”, etc.

After assembly, the MK3S+ was effortless to use in comparison to the Ender 3. It completely changed my mind in regards to what FDM printers could be. I was even able to get some incredibly detailed sculptures out of it (though, of course, not at the level of a resin printer, but still). This printer has been my main workhorse ever since, and I’ve been using it basically nonstop for all kinds of different projects. It’s even paid for itself with a side business I’ve been running by selling parts to people on FB Marketplace.

Overall, I’d personally advocate for FDM. It is far more versatile than resin in terms of print durability, functionality, cleanliness, and size. It’s even cooler if you get into some light CAD design for making your own parts. Even if you want to make detailed models with it, you can always just swap to a smaller 0.2mm nozzle, print at a lower layer height, and get very detailed prints.

I am into woodworking, custom keyboards, gaming, and a whole host of other hobbies (including 3d printing, haha) FDM is definitely the most useful for my personal hobbies, though I have been interested in Warhammer 40K lately, so maybe a new resin printer is on the horizon for me, who knows.

Ultimately, it’s up to you to decide, but if I had to suggest a good start, I’d go with FDM unless you really want to make minis.

Consumer 3D printing. I still can’t get over the fact that I’m able to get a device for only a few hundred bucks that lets me manufacture almost any kind of simple widget on-demand in a matter of hours. It feels like I’m living in the future.