If you are just looking to repurpose an old device for around the house use and it won’t ever be leaving your home network, then the simplest method is to set a static IP address on the device and leave the default gateway empty. That will prevent it from reaching anything other than the local subnet.

If you have multiple subnets that the device needs to access you will need a proper firewall. Make sure that the device has a DHCP reservation or a static IP and then block outgoing traffic to the WAN from that IP while still allowing traffic to your local subnets.

If it is a phone who knows what that modem might be doing if there isn’t a hardware switch for it. You can’t expect much privacy when that modem is active. But like the other poster mentiond a private DNS server that only has records from your local services would at least prevent apps from reaching out as long as they aren’t smart enough to fall back to an IP address if DNS fails.

A VPN for your phone with firewall rules on your router that prevent your VPN clients from reaching the WAN would hopefully prevent any sort of fallback like that.

This was a separate outage unrelated to CrowdStrike a few hours earlier that took down a couple of airlines as well.

A majority of the VMs in the Azure CentralUS datacenter went down due to some sort of backend storage issue.

Edit: I guess I should have read the article they do say CrowdStrike. They seem to be implying that they were one event when the cloud services outage was earlier and unrelated. I had heard about grounded flights during the first outage as well. So they likely are combining the two events here.

I would think most wifi jamming is just deauth attacks. It is much easier to just channel hop, enumerate clients, and send them deauthentication packets.

This way you don’t need a particularly powerful radio/antenna, any laptop/hacking tool with Wi-Fi is all you need. There are scripts out there that automate the whole thing, so almost no deep knowledge of wifi protocols are required.

WPA3 has protected management frames to protect against this but most IoT cameras probably don’t support WPA3 yet.

Updates for CrowdStike are pushed out automatically outside of any OS patching.

You can setup n-1/n-2 version policies to keep your production agent versions behind pre-prod, but other posts have mentioned that it got pushed out to all versions at once. Like a signature update vs an agent update that follows the policies.

This is likely something like a FIDO token/passwordless setup of some sort (i.e. Windows Hello).

The thumbprint would just unlock the hardware device, so the thumbprint itself wouldn’t need to be transmitted to your credit issuer. This gives you full two factor authentication of your identity because you need the hardware device (something you have) and your biometric (something you are). They also often allow pins (something you know) instead of biometrics as the second factor.

I believe so. The package descriptions for most of the ZFS packages in Ubuntu mention OpenZFS, so it certainly appears that way.

You can still create pools that are compatible with Oracle Solaris, you just have to set the pool version to 28 or older when you create it and obviously don’t update it. That will prevent you from using any of the newer features that have been added since the fork.

Well worse than that, Oracle closed sourced ZFS, so OpenZFS was forced to become a fork, and they are no longer compatible with each other.

As for GPL the CDDL license that ZFS uses made sure that code contributions attribute copyright to the project owners, which means they can change the license as they please without having to track down contributors.

You would think with their investments in Oracle Linux and btrfs they would welcome that license change, but apparently they need excuses to keep putting money into Solaris, and their Oracle ZFS appliances instead.

One nice thing about KDE compared to most of the other DEs is that the window manager (kwin) is separate from the underlying components, and it can be replaced!

There are many walkthroughs like this one out there: https://github.com/heckelson/i3-and-kde-plasma

You get i3 for tiling window management but you still get to use KDE’s system settings to do configuration like display settings, themes keyboard shortcuts, etc, just like you did before. You can also pick and choose which parts of the KDE desktop you want to keep (menu, krunner, etc)

Since i3 is just a window manager and is lacking all of that system level stuff it really rounds out i3 to feel like a full DE instead of having to piece together other tools to do those things.

August 15th. https://discourse.ubuntu.com/t/noble-numbat-release-schedule/35649

Assuming you mean hot plugged devices (thumb drives and external drives) KDE mounts them under /media

If you are expecting them to auto mount, KDE distros often don’t have that enabled by default. Though I think Kubuntu has that enabled by default now so maybe that has changed. Go to System Settings -> Hardware -> Removable Devices to adjust the automount settings defaults and per drive settings.

If you don’t have automount enabled you probably will need to browse to them in Dolphin once to get KDE to mount the drive first.

Digitizer issues are usually from getting the wrong digitizer. They are programmed differently for the HAC-001(-01) (v2 classic switch) vs the HAC-001 (v1 classic switch).

More specifically the game card reader board that the digitizer plugs into needs to match. So make sure you buy your digitizer to match the game card reader version, or buy a game card reader to go with it (you can get them for ~$14). Unfortunately many digitizer sellers on eBay don’t say which model it is designed for.

Alternatively you can mix and match those versions if you have an unpatched/modded switch. Just launch Hekate, go to tools and run the digitizer calibration.

I haven’t repaired too many switches but the first time it happened to me I had a spare v2 game card reader and that fixed it immediately. Second time I used the Hekate method and that worked just as well