Vuescan is great, and near as I can tell it’s one guy. Totally worth it.

Pop has automatic updates now.

The other partner in FUTO is Louis Rossman. Maybe one cancels out the other?

Ummm, their SteamDeck runs Pop? Have you modded it? Because last I checked it ran SteamOS (an immutable Arch variant) and used KDE in desktop mode, whereas Pop uses Gnome…

What are render times like?

I’ve built every NAS/home server I’ve ever had. There’s lots of options out there for the case as well. You could take an SFF Mini ITX case with a single 5 1/4" drive bay and put an icy dock 8 x 2.5" SATA backplane in it. Don’t know if icy dock (brand) is widely available in Europe…

Just pointing out that if you imagine it (form factor with 8 hot swappable drives) there’s probably a solution to build it from scratch.

More than likely. Since the description clearly states “8x3.5 HDD Hot-Swap drive bays.” It’s not the only case of similar form factor that you can get 8 hot swap drive bays. There are literally tons of NAS case designs to choose from.

https://www.newegg.com/black-jonsbo-n3-mini-itx/p/2AM-006A-000E1?item=9SIAY3SJYT0310&cm_sp=SP-_-974336-_-0-_-1-_-9SIAY3SJYT0310-_-nas+case-_-case|nas-_-1

The problem isn’t with Nextcloud (I had the same issue happen with me). The problem is with the default sync settings on Thunderbird and DAVx5 (at least for me). Thunderbird defaulted to a longer than I wanted synch schedule, so I dropped it down to syncing every 15 minutes. DAVx5 was set to 240 minutes unless the event was created on my phone. Once I updated both schedules to every 15 minutes, I haven’t noticed an issue.

For the life of me, I can’t figure out the search terms I need to find what I’m looking for. On top of that, I’m beginning to think I heard it on a podcast. But I seem to remember an interview with someone at Valve talking about how they were upstreaming EVERYTHING they were doing. I would assume that meant kernel work as well.

I use some of their switches using Home Assistant’s Homekit integration. Set them up on wifi in their app, add to HA, then block internet access in my router’s firewall. Kind of the best of both worlds at that point.

OpenMediaVault is a Debian server with a Web UI.

Not to sound flippant, but it seems like a solution looking for a problem. I use the --cleanup flag, and if there’s an issue, rolling back is as simple as changing dockerimage:latest to dockerimage:version that worked.

Unless I’m missing something.

For Corsair - I’ve been very happy with ckb-next. https://github.com/ckb-next/ckb-next

It is pretty robust, allows remapping of key/button bindings, changing of RGB, DPI, etc. Their goal is to replace iCUE. Very robust for mice and keyboards, but they also list other hardware that it is known to work with in their wiki. Might be worth a look.

Did you encrypt your whole drive during Pop installation? If so, I’ve never found a good way to dual boot with an encrypted drive other than refind.

That looks an awful lot like what I have. I’m using the Lian Li PC-D600. I think I’ve managed to get my hands on one of the last ones in the wild. They aren’t even available used on eBay anymore.

What I like most about it (and the Tower 500 that you linked) is that the motherboard is on one side, and the drives are on the other. Keeping the drives cool is easy, I just upgraded the fans on my SATA backplanes and the case, and even under load the drives run very cool.

You can have this case when you pry it from my cold dead fingers.

Yes. They just won’t look/work the same as the native Gnome apps. I select apps based on functionality, so I have a mix of both KDE and Gnome apps on my Gnome DE.

I use Cryptomator. Does exactly what you describe.

I was curious, so I took a look at what it was using. At idle, it sits at 927.4 MB, and 0.1% of my CPU (the 7700 is only a 4 core CPU). I opened and edited a Word document on OnlyOffice (I have it connected using the Nextcloud connector). It spiked to 1GB of RAM, and momentary spikes to 35% of CPU, and then back down to 0.1-0.2% of CPU. I’d say it’s worth trying at least. Worst case scenario, you delete the Docker container if it’s unworkable.

However, I think the Community Edition is lighter than advertised.

I run the Community Edition of OnlyOffice documents server on my home server in Docker. My server has a Core i77 7700 and 32GB of RAM. And tons of other Docker containers. No issues.