At least in arch, the package qbittorrent-nox now contains the ability to connect to i2p. For people starting out, using i2p you wouldn’t need to use a VPN to download your favorite “linux ISOs”; just use i2p and have a fully automated Jellyfin server!
I recommend using i2pd as the i2p router
I wish for i2p torrenting community to grow so we can get rid of VPNs.
It is growing! Lots of new (and somewhat spicy) content appears every day on the Postman.
Working on it 😉
Wouldnt it a take a month to download a Linux ISO over i2p?
I’d wager around 2 hours once the router has been running for a day or so.
Tor seems fast now but in my day and age, it was an hour to see the wikipedia main. (Or at least felt like it)
Currently testing it. 20 peers. 1.5GB. Takes about 20 min.
Does it work for the average joe?
If not, what’s missing such that we all can move to it?
It’s all free and open source! If you’re on windows it might be a little more difficult so at least having a linux PC you can reliably have on 24/7 would make things easier. I personally use arch (I’ve tried this on my endeavour OS), very easy installation for beginners) for this since it’s rolling release (latest versions of packages!) and the AUR is a godsend. The programs themselves take little ram and cpu, with qbittorrent probably needing the most ram once you have more torrents downloaded (I’m running this on 4 cores of CPU and 4 gigs of ram alongside my minecraft server, a tor relay and a monero node. any old laptop repurposed with endeavour should do the trick)
the steps I took to do this (on endeavour os) was:
install i2pd
sudo pacman -S i2pd
Install qbittorrent webui
sudo pacman -S qbittorrent-nox
install prowlarr (optionally sonarr and radarr, which will automatically manage video files for you. Plays reaaaally well with Jellyfin, so you wouldn’t have weirdly formatted files that is being read by Jellyfin)
yay -S prowlarryay -S sonarryay -S radarr
Lastly you have to turn enable the *arrs in systemd
sudo systemctl enable --now prowlarr- (do the same with sonarr and radarr if you have them)
(or you can also go the docker route with qbittorrent, prowlarr, sonarr and radarr, if you don’t have arch. This is the more universal route and can handle many more devices. Although I have not checked if
qbittorrent-dockerhas i2p integration yet. For that you may need to swap out qbittorrent for vuze, or apply the patch in the comment in the link i posted in the docker container [which is editing theqBittorrent.conffile])For the average joe i’d say it’ll be an afternoon’s worth of labor to set up, and the upside is not relying on a VPN to install content and a fully automated Jellyfin server! Plus you get to help the steadily-growing i2p network If you have more questions I’d be happy to answer here :)
Thanks for the write up. We need such a write up as a top level post if you’re down for it.
I use docker and prefer docker over a package.
I’d love to jump on the bandwagon but until now I thought it’s still years away.
Do you know if this is the right docker image? https://geti2p.net/de/download/docker
Are there other trackers than postman? For e.g. German/French content?
How to connect qbittorrent and i2p in docker?
Are there already private trackers as well? I prefer private ones.
I haven’t tried the i2p docker image, but it shouldd work. Let me know
There are some German and French content that I see occasionally in Postman. In the actual i2p postman site you can filter for the French and German language.
If you’re using the docker image the
network_modeis set tohost, so it should work the same as if i2p was installed without containerization.
where
7656is the SAM bridge port. I’m using version 4.6.3 of qbittorrent and it has this feature. The arch package for qbittorrent-nox (the webui edition of qbittorrent) already has this feature. I just checked; the latest docker image for qbittorrent should already have this feature! https://github.com/linuxserver/docker-qbittorrentNot too sure about private trackers. Although, due to the fundamental anonymizing feature of i2p there would be no way for copyright trolls to track IP addresses and send mass lawsuits, which private trackers defend against.
Private trackers are not only protecting you. It also protects against full time leachers. And people keep up the quality of the seeds. Bad torrents die quickly.
So how does one actually use I2P?
if you install java i2p it should come with the browser and torrent client (i2psnark) pre-packaged
for i2pd (c++ implenetation) you have to configure firefox (i use librewolf with noscript) to use the http proxy (on port 4444).
Absolutely. Go to https://geti2p.net/ to get started. There are some super simple Windows installers that make everything just a few clicks. If you’re on Linux it’s built into the package managers for Ubuntu/Debian but from my experience it’s a lot better if you can get the Java source version working because then it can self update and you’ll always have the most current release.
Once it’s installed and running let your new i2p router run for a minimum of about 30-45 min to explore the network and build good connections with peers. The longer it runs the more stable it becomes but it should be usable after about 30 minutes on your first start up (subsequent start ups are a little faster after your router gets to know the network a little better). And that’s it! You’re now running an i2p router!
The only part where things get a little hard is with the proxy settings… Unfortunately there just aren’t enough active devs or funding in i2p to support a dedicated browser like Tor so this is the only side of i2p that tends to get more involved. You need to configure a browser to proxy http requests through the port used for i2p http: 4444. If the i2p router is on the same machine as the browser then it’s just a matter of entering your local address (127.0.0.1) and port (4444) into your proxy settings. If your i2p router is remote, you need to use ssh port forwarding on port 4444. Alternatively, there is a Firefox plugin that one of the core i2p devs (idk) maintains which automatically containerizes and proxies all .i2p addresses while leaving normal web traffic alone, it’s called “I2P In Private Browsing”. Only warning that the dev for that project cites is that the plugin, although open sourced, has not gone through any security auditing so there’s no guarantee that no information gets leaked to the clear web - so basically just avoid this if maximum privacy is your goal.
After your router is started up and proxy settings are configured, you’re good to go! Check out some starter sites like i2pforum.i2p to join in on i2p related discussions and development. notbob.i2p also offers a nice sortable directory of some sites hosted on i2p. Or… Host your own hidden service(s)! The standard i2p install comes with a prepackaged and preconfigured Jetty web server, just start the service from your local tunnels page and you’re now hosting a hidden website!
The possibilities are pretty much endless from here, anything that communicates on TCP/UDP can be tunneled through I2P. Which by the way is a huge advantage over Tor since Tor does not even support UDP. Unlike Tor, I2P also has a much better incentive for node operators since every user is a node, the more people who use I2P, the faster and better it becomes… A Tor node only gets spun up when someone chooses to donate their resources to the network out of the grace of their heart. This also applies to P2P downloading. In fact… It helps to grab a popular download from an I2P indexer when starting a fresh router as that helps introduce your client to new peers. Torrenting is not even an option on Tor as it is basically DDOS’S the network of limited nodes…
You forgot to mention that download speeds over i2p are very slow.
Haha. Well, I guess I have a ulterior motive for promoting i2p; the more people get in it and contribute to the network (port forward the NTCP2 and SSU2 to accept transit tunnels) the better network speeds will get! Just the act of torrenting through i2p will help the network tremendously.
I have noticed that speeds in i2pd (c++) are faster than in the original java implementation so maybe you can try that out? It’s fast enough for my use case, but yes streaming torrents in i2p is still far away.
But the upside is, you don’t have to rely on a VPN to protect yourself against copyright trolls! Plus, putting it on a fully automated *arr stack means you can just add a movie on radarr and let the *arrs take care of everything in about a day or so. I average at about 200-300 KiB / s per well-seeded movie file, and around half that for something poorly seeded.
That’s still extremely slow compared to my 6MB/s network connection. Still you are right the more people that join the fast it will be.
The other issue I’ve found is it doesn’t have all the torrent selection the clearnet has.
Has this improved or is it still the same?
it is improving a load. Also you can ask on the wishlist of postman. Many folks are happy to reseed it for you or make it available on I2P.
You can have qBittorrent running in mixed mode, which doesn’t give you the privacy of i2p but does give you even more leachers than just using normal ip and helps grow the i2p network. Everyone should get i2p and use mixed mode or i2p only imo.
deleted by creator
