I’m having trouble understanding all the benefits of BTRFS and how they’ll apply to me.
Copy on Write and auto-compression seem like they will free up a bit of space.
What other practical benefits will I see from using BTRFS? Are there any noticeable performance benefits?
I use my computer to dual-boot. I don’t need snapshots because I have a custom script for a fresh install. I use my PC for gaming and work. I’ve got an NVMe, two SSD’s and one HDD.
Thanks in advance!
Transparent compression, snapshots, copy-on-write, deduplication, and data checksumming (and healing via read or scrub) are the main things you might notice as an end-user. BTRFS is mostly on par or slightly slower than other simpler filesystems for speed (can be faster on HDDs due to compression), so if you’re using it you probably want to be taking advantage of the features it offers, not because it’s going to be faster.
Healing won’t work without copies (RAID) available. However, scrubbing regularly can also allow your drive to detect and correct errors before they become irreparable.
As a (semi) power user I also use btrfs subvolumes to create “partitions” (single disk system, @root, @home, @docker), allows for making snapshots only for system or user data, etc.
All around, I love btrfs and I am never going back to journaling fs like ext4
If you don’t think you want snapshotting then dont worry too much about it and use whatever fs you like. if you want a nice btrfs experience try tumbleweed or leap, it is already fully integrated with system and grub , and maintenance with cleanup etc. cobbling together btrfs on your own is fine too but if you miss sometging and mess things up it is usually user error not btrfs error. .
For me, snapshots are the best part of BTRFS because you can easily roll back bad updates without doing a fresh install. It might not be worth reinstalling for, but there’s no reason not to on your next install.
I know it’s all in my head, but there’s something about a fresh install that gives me comfort.
I do a fresh install every few months when something starts behaving funky and it’s normally faster than figuring out what’s wrong.
Snapshots just don’t have the same appeal to me lol
deleted by creator
Damn bro, start learning about data recovery. I would be investing all my time into it.
You do a fresh install every couple months? Damn. I’m using the same install from like… 7 years ago? Which was also 3 laptops ago. I just keep copying the install partitions from one laptop drive to the next.
There is definitely something rewarding to figuring out an issue and fixing it, vs starting from scratch every time. Also, you realistically shouldn’t be having serious issues every few months, unless you’re running a rolling distro like arch and there’s issues with packages. I do think a bit of that might be in your head,or you’re experiencing some weird hardware issues/failure.
the main advantage of snapshots is how fast it happen, in two reboots with little to no wait time you can get your system back
deleted by creator
I use BTRFS simply because I run a rolling distro of Linux. For the average user, I don’t think it is quite as necessary but the snapshots are nice. Of course, you could use timeshift to make snapshots as well.
I love btrfs. Mostly, because I had a couple of instances of data loss with ext4, and because it’s far more user friendly than xfs. Btrfs has sane defaults, and when you do want to use the tooling, there’s a lot of good documentation, and it’s mostly straightforward.
That said, unless you have some reason to be mucking around with the fs or want to play with snapshots or such, then I’d say just use your OS defaults.
Yes, snapshots nice to have and compression reduces the disk usage for the operating system and software quite a bit.
I’ve had a major issue with btrfs and nvme. Not sure if you have a laptop or a desktop, but it works fine on my desktop and shit on the laptop. Snapshots still didn’t save my system the other day when the system broke in the middle of a kernel upgrade. I even had snapshots in grub. I still had to reinstall to be able to access the system. I was also told that xfs is much better. Haven’t tried it yet. I personally don’t care for btrfs, and I’m using the tried and true ext4 and it’s been serving me very well. I have the root and home partitions separated in case shit goes haywire.
This is hearsay or you didn’t properly configure your snapshots, no way around that.
I found the “best of both worlds” setup is xfs for root fs and then btrfs for /home.
Is this arch?
Almost. EndeavourOS to be exact.
Yeah, I assumed something similar. Arch (may be endeavor also) is very much a la carte build your own system, so coyld be some tweaks needed. I found Leap and Tumbleweed have no issues with btrfs because its integral to the whole distro. My NVME use on desktop and laptop have been going steady for 7 years.
I’ve always wanted to try opensuse. I have, but I was confused with their package manager. I was too lazy to figure it all out. I may give it a try. Also, I hated their installed for manual partitioning. It was overly complicated for me. I’ll mess with it in a VM to learn more about how to manually partition and also mess with their package manager more.
There is a 2 page zypper cheat sheet online that is helpful for learning the commands, but they also have Yast2-GTK GUI you can launch; installing packages is just clicking the checkboxes of what you want and unchecking for what you dont want, or selecting certain package versions and click the lock icon. Then hit apply. The nice part of the GUI is you can see what files it provides and read descriptions etc all in one place. I agree, the installer is confusing because there are so many ways to configure your partitioning-either manually or with auto, or semi auto., It is a bit overwhelming at first, I was lost when first coming to linux, and reinstalled it a few times to suit as I learned what it (and myself) was doing. Now that I’m used to it it provides an amazing amount of power and flexibilty.
I think the package manager isn’t hard to figure out. I do need to study the installer very hard so I can learn its ins and outs. I need my partitions separate. Thanks for the info. I really appreciate it
Also something not glaringly obvious is when you get to the summary page of the installer you can click the software title and it brings you to the package install section, you can uncheck any or all groups/patterns or click detail and choose individual packages that suit your needs.
For me, BTRFS is worth it for the transparent compression and file integrity checks alone.
I am not sure what Fedora does for virtual machines via boxes (like transparently disabling COW), but one caveat with BTRFS is that you have to be aware that COW is a problem for usage patterns of virtual machines on their images. Just for this one example alone BTRFS is probably not a good fit for the average user.
Another thing which I just learned very recently, is to mount BTRFS volumes with the noatime option significantly speeds up a lot of workloads on my machine (machine has a decent SSD). Again, using the noatime option might create some problems in corner cases, so one should be aware what one is doing.
It you have a functioning dual boot don’t worry about it. Next install it’s worth looking in into and pretty easy to setup. It has trim support for ssds and is way easier to resize on a live system than lvm with another filesystem
I’m mostly in it for the RAID1 with checksums. If a bit gets flipped, it’ll get flipped right back from the other copy next time the automatic scrub happens. Normal RAID1 can’t do this because, without checksums, it doesn’t know which copy is good.
If you’ve written shell scripts, I don’t think you’re an average user. 😋
I use ZFS, not BTRFS, but both have snapshots, and if you’re someone who likes to tinker with their system like me, it lets you do so without worrying that it will break.
Yes, a few examples of advantages here: https://lemmy.world/post/3197228
I’ve installed Timeshift and added the necessary hooks. Now my system gets snapshot’d on every update and the snapshots get added to the GRUB boot menu.
If an update breaks the boot, I can hit the reset button and just boot the old version that still works.
Linux may not have something as powerful as System Restore on Windows, but this comes pretty close.
CoW is pretty bad for performance so you should turn it off in certain cases if you can spare the disk space. The same goes for compression. Both concepts work excellently whens applied to the right files, but they’re not magic.
Timeshift works on other filesystems through hard links and rsync, but the BTRFS support is more powerful.
